Description
The WB48 is a BBB cape controller using the FPP software. With 48 Remote ports this controller is capable of controlling over 40,000 pixels.
Connect up to 12 Universal Differential Receivers for 4 remote ports at each location.
You can run up to 800 Pixels per port at 40fps and up to 1400 pixels per port at 20fps.
Features:
12 x RJ45 Jacks to connect to 4 Port Universal remote receivers.
Or use Falcon Smart receivers for even more!
5V ONLY
OLED display
4 Navigation buttons and a test button
1 Boot button to force SD card Bootup
Header pins to add a Real Time Clock
Reverse Polarity Protection
Voltage Sensors
- - -
Includes:
1 x WB48 Controller Board
1 x BeagleBone Black Rev C
1 x 32GB SanDisk Micro SD card with FPP v6 Installed.
- - -
Assembly Instructions:
1) Mount the BBB on the bottom side of the controller board
2) Connect power wires to the power input terminals on the board.
(ensuring wiring matches markings on board).
3) Open xlights - Add ethernet controller (Vendor Wally's Lights - Controller WB48)
If its not available, close xlights, download & copy this file to your xLights Controllers folder (often C:\Program Files\xLights\controllers) then restart xLights.
Starting with FPP 6 you will need a license key for the FPP software
It's a one time purchase and once installed is stored on the eeprom of the controller, so even if you reimage the bbb it'll still be valid.
The 48 port key is $30 (approx £25) and is available from https://shop.falconplayer.com/